Professional manufacturer of transmission machinery

caoxiaofeng@cnreducers.com

Stepper motor applications _ mechanical application of stepping motor

by:Zhenyu      2020-10-25
When the stepper motor to drive, please make sure the motor power is shut down. During the drive power can't disconnect the planetary gear motor. Here recommend not to motor fuses received on the ground or power supply.


4 motor can only use a way to connect. Stepper motor drive can be controlled by controlling the pulse number of angular displacement, so as to achieve the purpose of accurate positioning; As well as by controlling the pulse frequency to control motor rotation speed and acceleration, so as to achieve the purpose of speed regulation and positioning.


6 line motor can be connected by two ways: in series, the center tap. In serial mode, the motor under low speed has more operation torque, but not as fast as in the center tap running. Series operation, the motor need to run at less than 30% of the current center tap way in order to avoid overheating.



eight line motor can be connected by two ways: in series and in parallel. Stepper motor drive can be controlled by controlling the pulse number of angular displacement, so as to achieve the purpose of accurate positioning; As well as by controlling the pulse frequency to control motor rotation speed and acceleration, so as to achieve the purpose of speed regulation and positioning. Series at low speeds greater torque, torque is small and in high speed. Series operation, planetary gear motor need to current in parallel manner, 电子流) 50% of the operation to avoid overheating.



general stepper motor open-loop control is accomplished by drive the pulse number and frequency of the signal input end of the input to realize the Angle and speed of the stepper motor control, without the feedback signal. Stepper planetary gear motor driver is a kind of electrical pulses into angular displacement of the actuator. When stepping drive receives a pulse signal, it drives stepper motor according to set the direction of a fixed point ( Called & other; Interval Angle & throughout; ) , its rotation is based on the Angle of the fixed step by step. But the stepper motor is not suitable for use in the same direction for a long time operation, easy to burn out products, even if it is usually a short frequent actions better.


Hangzhou Xiaoshan Zhenyu Transmission Co., Ltd.’s administrative systems and management team are extraordinary-you'll need them to get a new location up and running.
Compare the various types of that are available. At Zhenyu Transmission, the range is constantly being updated with new models, technical details and competitive prices.
Hangzhou Xiaoshan Zhenyu Transmission Co., Ltd. has been focusing on reaching the ideal profits.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...