Professional manufacturer of transmission machinery

uses for an angle grinder

by:Zhenyu      2020-02-20
The use of the angle mill here is a list of common uses and less common uses of the angle mill.
Grind the weld inside the pipe smooth grind the weld and the metal to be welded, cutting and grinding stone with metal cutting ceramic wave and wire brush on masonryDescription removing grinding aid removing angle grinder in steel rust is an electric tool and a high speed rotary tool for mold.
It is very versatile and has many uses in the home and workshop.
Its basic working principle is composed of high-speed AC motor.
There is a right angle attachment on this motor, in which the knife bar extends outward.
This angle allows stability and control of the tool.
The speed often exceeds 10,000 rpm!
Although it is mainly used for metal processing, it has applications involving the stone, ceramic and masonry industries.
This tool has a wide range of wheels and fixtures.
One of the most common uses of Angle Mills is grinding welds.
There are several reasons why this may be done.
A weld that is porous or not properly laid needs to be ground back to the surface for re-welding.
Another reason may be to simply smooth the welding so that additional welding channels can be applied and to ensure a safer combination.
Finally, the weld can be ground for the purpose of decoration.
This is an application that does not want the appearance of the weld.
This is a fine line that enough welds need to be maintained to maintain the integrity of the joints, but is suitable for a smooth finish of the metal.
In the photo below, I grind smooth welds on this 3D steel shape and smooth the surface a little.
There are two main purposes for this.
First, it has more decorative features in itself.
Second, smooth everything down so I can see the defect better so I can go back and re-
Weld to fill the edge of the metal defect.
1 The use of angle grinder is very fast and effective in being a rust remover.
This is best done with a wire wheel attachment.
There are mainly two kinds of brush accessories.
One is a woven wire wheel for irregular and contoured metal surfaces.
The other is the Cup brush.
This is the best graphic design such as large sheet metal parts.
It is recommended that you wear a dust mask or you will suck in the orange rust dust cloud.
In addition, these brushes are also conducive to the removal of paint.
The video below is very enlightening for removing rust and paint using a cup brush.
Removing the brazing agent has some real benefits compared to conventional welding.
Lower temperatures and less distortion are certainly one of the benefits.
There is a warning or inconvenience if you wish.
This is the amount of flux used in most welding operations.
When the metal cools, the flux becomes hardened into a discolored glass-like substance.
This is the convenient angle grinder.
Similarly, we usually use electric brushes.
This is also suitable for applying a good brush surface to the connected metal.
The first photo below shows a rough form of artwork that removes the brazing agent with a wire brush on the angle grinder.
The second photo shows the finished wall©Line Brush after cleaning cor.
Smoothing and polishing metal with a Angle grinder is not much different from grinding a weld or making a grinder pattern.
The difference is that smoothing is done by removing less material than grinding.
The grinding machine pattern on the metal focuses on the placement design on the metal surface, smoothing means polishing the entire surface to remove imperfections, flat uneven surfaces, or further rounded curved edges.
The accessories and wheels for this special task are the turning of various grits.
The most common grits are 36, 40, 60, 80 and 120.
Another option is to obtain a back pad suitable for a specific model of the angle grinder.
With this, there is a sandpaper plate specially designed for this purpose.
The grinding machine pattern on metal is now popular in abstract metal art with metal panels with carefully crafted patterns.
This effect is particularly amazing on aluminum as it is a bright white metal.
When painted with clear or transparent paint, the metal presents a gem-like prism.
There are many ways to do this.
As shown in the video above, a wire Cup brush can be used.
Other options are to Polish and grind discs of varying degrees of sophistication.
This is a technology that is better understood through practice and experience.
You may have to cut strange shapes when you install the tile floor.
It may be inconvenient or not cost-effective to use a special tile cutting saw.
In the absence of a large amount of cost and complex setup, one way to do this is to use the angle grinder.
Cutting the tiles, you need a diamond blade with a continuous edge.
Below you will see an informative video demo of cutting tiles with angle grinder.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...